134 Publications du LaMCoS (inscrites dans HAL et intégrées dans la collection LAMCOS) correspondantes aux critères sélectionnés :

 

2018 - Article dans des revues - hal-03139805. -
Titre : Longitudinal compression and Poisson ratio of fiber yarns in meso-scale finite element modeling of composite reinforcements
Date de Publication : /05/2018
Editeur : ElsevierJournal : Composites Part B: Engineering - Volume : 141 - Pages : 9-19
DOI : 10.1016/j.compositesb.2017.12.042
Auteur(s) : D. Wang, N. Naouar, E. Vidal-Salle, P. Boisse

2016 - Article dans des revues - hal-01538195. -
Titre : Simulation EF à l’échelle mésoscopique de la déformation de renforts composite à partir de microtomographie à rayon X
Date de Publication : //2016
Editeur : EDP SciencesJournal : Matériaux & Techniques - Volume : 104 - Pages : 409
DOI : 10.1051/mattech/2016029
Auteur(s) : Naïm Naouar, Emmanuelle Vidal-Sallé, Éric Maire, Julien Schneider, Philippe Boisse

2016 - Article dans des revues - hal-01538193. -
Titre : Meso FE simulation of composite reinforcement deformation based on X-ray computed tomography
Date de Publication : //2016
Editeur : EDP SciencesJournal : Matériaux & Techniques - Volume : 104
DOI : 10.1051/mattech/2016029
Auteur(s) : Naïm Naouar, Emmanuelle Vidal-Sallé, Philippe Boisse

2015 - Article dans des revues - hal-02173791. -
Titre : 3D composite reinforcement meso F.E. analyses based on X-ray computed tomography
Date de Publication : /11/2015
Editeur : ElsevierJournal : Composite Structures - Volume : 132 - Pages : 1094-1104
DOI : 10.1016/j.compstruct.2015.07.005
Auteur(s) : N. Naouar, E. Vidal-Sallé, J. Schneider, E. Maire, P. Boisse

2015 - Article dans des revues - hal-01804740. -
Titre : 3D composite reinforcement meso F.E. analyses based on X-ray computed tomography
Date de Publication : //2015
Editeur : ElsevierJournal : Composite Structures - Volume : 132 - Pages : 1094-1104
DOI : 10.1016/j.compstruct.2015.07.005
Auteur(s) : N. Naouar, E. Vidal-Salle, J. Schneider, E. Maire, P. Boisse

2014 - Article dans des revues - hal-02173728. -
Titre : Meso-scale FE analyses of textile composite reinforcement deformation based on X-ray computed tomography
Date de Publication : /09/2014
Editeur : ElsevierJournal : Composite Structures - Volume : 116 - Pages : 165-176
DOI : 10.1016/j.compstruct.2014.04.026
Auteur(s) : N. Naouar, E. Vidal-Sallé, J. Schneider, E. Maire, P. Boisse

2014 - Communication dans un congrès - hal-01538207. -
Titre : Analysis of Composite Reinforcement at Mesoscopic Scale from X-Ray Microtomography
Date de Publication : //2014
- Volume : 611 - Pages : 316--323
Conférence : Key Engineering Materials - 2014
Auteur(s) : Naïm Naouar, Emmanuelle Vidal-Sallé, Julien Schneider, Éric Maire, Philippe Boisse

2014 - Communication dans un congrès - hal-01096532. -
Titre : Mesoscopic finite element simulation of the mechanical behavior of woven dry fabrics
Date de Publication : 22/06/2014
Conférence : Eccm16 - 16th European Conference On Composite Materials - 1986
Auteur(s) : Audrey Wendling, Gilles Hivet, Jean-Emile Rocher, Jean Gillibert, Jean-Luc Daniel, Philippe Boisse, Emmanuelle Vidal-Salle

2014 - Article dans des revues - hal-01096488. -
Titre : Consistent geometrical modeling of interlock fabrics
Date de Publication : 01/11/2014
Editeur : ElsevierJournal : Finite Elements in Analysis and Design - Volume : 90 - Pages : 93-105
DOI : 10.1016/j.finel.2014.05.010
Auteur(s) : Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Sallé, Philippe Boisse

2014 - Article dans des revues - hal-01071016. -
Titre : Characterization of the dynamic friction of woven fabrics: Experimental methods and Benchmark results
Date de Publication : 24/08/2014
Editeur : ElsevierJournal : Composites Part A: Applied Science and Manufacturing - Volume : 67 - Pages : 289-298
DOI : 10.1016/j.compositesa.2014.08.026
Auteur(s) : Ulrich Sachs, Remko Akkerman, Konstantine Fetfatsidis, Emmanuelle Vidal-Sallé, Josefine Schumacher, Gerhard Ziegmann, Samir Allaoui, Gilles Hivet, Bernhard Maron, K. Vanclooster, Stepan V. Lomov

2013 - Article dans des revues - hal-00951070. -
Titre : Analysis of the stress components during the forming of a textile composite reinforcement
Date de Publication : //2013
Editeur : Trans Tech PublicationsJournal : Key Engineering Materials - Volume : 554-557 - Pages : 492-500
DOI : 10.4028/www.scientific.net/KEM.554-557.492
Auteur(s) : Gilles Hivet, Emmanuelle Vidal-Salle, Philippe Boisse

2013 - Article dans des revues - hal-00951067. -
Titre : Simulation of composite forming at meso scale
Date de Publication : //2013
Editeur : Trans Tech PublicationsJournal : Key Engineering Materials - Volume : 554-557 - Pages : 410-415
DOI : 10.4028/www.scientific.net/KEM.554-557.410
Auteur(s) : Sebastien Gatouillat, Andrea Barregi, Emmanuelle Vidal-Salle, Philippe Boisse

2013 - Article dans des revues - hal-00934559. -
Titre : Meso modelling for composite preform shaping - Simulation of the loss of cohesion of the woven fibre network
Date de Publication : 11/11/2013
Editeur : ElsevierJournal : Composites Part A: Applied Science and Manufacturing - Volume : 54 - Pages : 135-144
DOI : 10.1016/j.compositesa.2013.07.010
Auteur(s) : Sébastien Gatouillat, Andrea Bareggi, Emmanuelle Vidal-Sallé, Philippe Boisse

2013 - Communication dans un congrès - hal-00873656. -
Titre : Consistent meshing preprocessor for interlock and 3D fabrics.
Date de Publication : 19/09/2013
Conférence : TexComp 11 - 1985
Auteur(s) : Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Sallé, Philippe Boisse

2013 - Communication dans un congrès - hal-00850096. -
Titre : Modélisation numérique du procédé de tissage de renforts fibreux pour matériaux composites
Date de Publication : 12/06/2013
- Pages : 10 pages
Conférence : 18èmes Journées Nationales des Composites (JNC 18) - 1995
Auteur(s) : Charlotte Florimond, Jérôme Vilfayeau, Emmanuelle Vidal-Sallé, Philippe Boisse

2013 - Communication dans un congrès - hal-00847463. -
Titre : Analysis of the stress components during the forming of a textile composite reinforcement
Date de Publication : 22/04/2013
Conférence : 16th Esaform Conference on Material Forming - 1987
Auteur(s) : Gilles Hivet, Emmanuelle Vidal-Sallé, Philippe Boisse

2013 - Article dans des revues - hal-00785642. -
Titre : Analysis of the stress components in a textile composite reinforcement
Date de Publication : //2013
Editeur : SAGE PublicationsJournal : Journal of Composite Materials - Volume : 47 - Pages : 269-285
DOI : 10.1177/0021998312439222
Auteur(s) : Gilles Hivet, Emmanuelle Vidal-Sallé, Philippe Boisse

2013 - Article dans des revues - hal-00785596. -
Titre : Mesoscopic scale analyses of textile composite reinforcement compaction
Date de Publication : //2013
Editeur : ElsevierJournal : Composites Part B: Engineering - Volume : 44 - Pages : 231-241
Auteur(s) : Q.T. Nguyen, Emmanuelle Vidal-Sallé, Philippe Boisse, C.H. Park, Abdelghani Saouab, Joël Bréard, Gilles Hivet

2012 - Article dans des revues - hal-00938544. -
Titre : Hyperelastic model for large deformation analyses of 3d interlock composite preforms
Date de Publication : //2012
Editeur : ElsevierJournal : Composites Science and Technology - Volume : 72 - Pages : 1352-1360
Auteur(s) : Adrien Charmetant, Jean-Guillaume Orliac, Emmanuelle Vidal-Salle, Philippe Boisse

2012 - Article dans des revues - hal-00938303. -
Titre : Experimental identification and validation of the plastic wave approach in hot forging of steels
Date de Publication : //2012
Editeur : ElsevierJournal : Wear - Volume : 286-287 - Pages : 35-44
Auteur(s) : Emmanuelle Vidal-Salle, André Dubois, Mirentxu Dubar, Laurent Dubar, Jean-Claude Boyer

2012 - Communication dans un congrès - hal-00850077. -
Titre : Mesoscopic finite elements for woven fabrics : which model for which application - from 3D fine to coarse shell modelling
Date de Publication : 09/07/2012
- Pages : 8 pages
Conférence : 8th European Solid Mechanics Conference - 1996
Auteur(s) : Emmanuelle Vidal-Sallé, Sébastien Gatouillat, Audrey Wendling, Andrea Bareggi, Pierre Badel, Philippe Boisse

2012 - Communication dans un congrès - hal-00850075. -
Titre : Hyperelastic constitutive modelling for 3D textile reinforcements: from observation to modelling
Date de Publication : 24/06/2012
- Pages : 8 pages
Conférence : ECCM 15 - 1982
Auteur(s) : Adrien Charmetant, Emmanuelle Vidal-Sallé, Philippe Boisse

2012 - Communication dans un congrès - hal-00850068. -
Titre : Friction measurement on dry fabric for forming simulation of composite reinforcement
Date de Publication : 14/03/2012
- Pages : 6 pages
Conférence : 15th ESAFORM Conference - 1995
Auteur(s) : Emmanuelle Vidal-Sallé, Francesco Massi

2012 - Communication dans un congrès - hal-00850060. -
Titre : 3D hyperelastic constitutive model for yarn behaviour description
Date de Publication : 14/03/2012
- Pages : 8 pages
Conférence : 15th ESAFORM Conference - 1995
Auteur(s) : Adrien Charmetant, Emmanuelle Vidal-Sallé, Philippe Boisse

2012 - Chapitre d'ouvrage - hal-00850052. -
Titre : 2D textile composite reinforcement mechanical behavior
Date de Publication : //2012
- Pages : 363-392
Auteur(s) : Emmanuelle Vidal-Sallé, Philippe Boisse

2012 - Communication dans un congrès - hal-00785673. -
Titre : Mesoscopic simulation of woven fabric forming: from a consistent geometry to finite element modelling
Date de Publication : 25/06/2012
Conférence : ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS - 1981
Auteur(s) : Audrey Wendling, Gilles Hivet, Jean-Luc Daniel, Emmanuelle Vidal-Sallé, Philippe Boisse

2012 - Communication dans un congrès - hal-00785667. -
Titre : CONSISTENT GEOMETRICAL MODELING OF INTERLOCK AND 3D FABRICS
Date de Publication : 25/06/2012
Conférence : ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS - 1981
Auteur(s) : Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Sallé, Jean-Luc Daniel, Philippe Boisse

2012 - Communication dans un congrès - hal-00772675. -
Titre : A Friction-Test Benchmark with Twintex PP
Date de Publication : 14/03/2012
- Pages : id
Conférence : the 15th ESAFORM Conference on Material Forming - 1995
Auteur(s) : Ulrich Sachs, Konstantine Fetfatsidis, Josefine Schumacher, Gerhard Ziegmann, Samir Allaoui, Gilles Hivet, Emmanuelle Vidal-Salle, Remko Akkerman

2012 - Article dans des revues - hal-00772374. -
Titre : A Friction-Test Benchmark with Twintex PP
Date de Publication : 03/02/2012
Editeur : Trans Tech PublicationsJournal : Key Engineering Materials - Volume : 504-506 - Pages : 307-312
DOI : 10.4028/www.scientific.net/KEM.504-506.307
Auteur(s) : Ulrich Sachs, Konstantine Fetfatsidis, Josefine Schumacher, Gerhard Ziegmann, Samir Allaoui, Gilles Hivet, Emmanuelle Vidal-Salle, Remko Akkerman

2011 - Article dans des revues - hal-00938547. -
Titre : Hyperelastic modelling for mesoscopic analyses of composite reinforcements
Date de Publication : //2011
Editeur : ElsevierJournal : Composites Science and Technology - Volume : 71 - Pages : 1623-1631
Auteur(s) : Adrien Charmetant, Emmanuelle Vidal-Salle, Philippe Boisse

2011 - Article dans des revues - hal-00938293. -
Titre : Modeling of the mechanical behavior of amorphous glassy polymer based on the quasi-point defect theory-part ii: 3d formulation and finite element modeling of polycarbonate
Date de Publication : //2011
Editeur : ElsevierJournal : International Journal of Non-Linear Mechanics - Volume : 46 - Pages : 507-518
Auteur(s) : R.G. Rinaldi, Roger Gaertner, Michel Brunet, Laurent Chazeau, Emmanuelle Vidal-Salle, Catherine Gauthier

2011 - Communication dans un congrès - hal-00850094. -
Titre : Approches macroscopiques et mésoscopiques pour la simulation du procédé de préformage des renforts de composites dans les procédés LMC
Date de Publication : 09/05/2011
Conférence : 10ème colloque national en Calcul des Structures - 1997
Auteur(s) : Philippe Boisse, Sébastien Gatouillat, Nahiene Hamila, Emmanuelle Vidal-Sallé

2011 - Communication dans un congrès - hal-00850093. -
Titre : Mise en forme de renforts de composites. Approche macro et mesoscopique
Date de Publication : 24/01/2011
Conférence : MECAMAT - 1986
Auteur(s) : Philippe Boisse, Sébastien Gatouillat, Nahiene Hamila, Emmanuelle Vidal-Sallé

2011 - Communication dans un congrès - hal-00850086. -
Titre : Simulation of forming and wrinkling of textile composite reinforcements
Date de Publication : 27/04/2011
- Pages : 6 pages
Conférence : 14th ESAFORM Conference - 1980
Auteur(s) : Nahiene Hamila, Peng Wang, Emmanuelle Vidal-Sallé, Philippe Boisse

2011 - Communication dans un congrès - hal-00850079. -
Titre : Numerical Predictions of Surface Damage During Bulk Forming Operations
Date de Publication : 27/04/2011
- Pages : 6 pages
Conférence : 14th ESAFORM Conference - 1980
Auteur(s) : Emmanuelle Vidal-Sallé, Jean-Claude Boyer

2011 - Communication dans un congrès - hal-00850073. -
Titre : Hyperelastic approach for the simulation of woven reinforcements at mesoscale
Date de Publication : 21/08/2011
- Pages : 8 pages
Conférence : ICCM 18 - 1982
Auteur(s) : Adrien Charmetant, Emmanuelle Vidal-Sallé, Philippe Boisse

2011 - Chapitre d'ouvrage - hal-00850049. -
Titre : Mesoscopic approaches for understanding the mechanical behaviour of reinforcements in composites
Date de Publication : //2011
- Pages : 486-528
Auteur(s) : Emmanuelle Vidal-Sallé, Gilles Hivet

2011 - Communication dans un congrès - hal-00785658. -
Titre : Modélisation à l'échelle mésoscopique de la géométrie de cellules élémentaires de renforts de composites tissés
Date de Publication : //2011
Conférence : Colloque National MecaMat - 2011
Auteur(s) : Audrey Wendling, Emmanuelle Vidal-Sallé, Philippe Boisse, Gilles Hivet

2011 - Communication dans un congrès - hal-00635791. -
Titre : Simulation à l'échelle mésoscopique de la mise en forme de renforts de composites tissés
Date de Publication : 28/08/2011
Conférence : LE 20ème CONGRES FRANCAIS DE MECANIQUE - 1975
Auteur(s) : Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Salle, Philippe Boisse

2011 - Communication dans un congrès - hal-00605449. -
Titre : Approche mésoscopique pour la mise en forme des renforts tissés de composites
Date de Publication : 15/06/2011
Conférence : 17èmes Journées Nationales sur les Composites (JNC17) - 1990
Auteur(s) : Sébastien Gatouillat, Emmanuelle Vidal-Salle, Philippe Boisse

2011 - Communication dans un congrès - hal-00605448. -
Titre : Use of a hyperelastic constitutive law for dry woven forming simulations
Date de Publication : 27/04/2011
Conférence : The 14th International Conference on Material Forming ESAFORM 2011 - 1980
Auteur(s) : Emmanuelle Vidal-Salle, Yamina Aimene, Philippe Boisse

2011 - Article dans des revues - hal-00605441. -
Titre : Approche hyperélastique pour la simulation de renforts tissés de composites. Etude en grandes transformations à l'échelle mésoscopique
Date de Publication : //2011
Editeur : IIETAJournal : Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials - Volume : 21 - Pages : 9-22
Auteur(s) : A. Charmetant, Emmanuelle Vidal-Salle, Philippe Boisse

2011 - Article dans des revues - hal-00601863. -
Titre : Experimental and numerical analyses of textile reinforcement forming of a tetrahedral shape
Date de Publication : //2011
Editeur : ElsevierJournal : Composites Part A: Applied Science and Manufacturing - Volume : Volume 42 - Pages : Pages 612-622
Auteur(s) : Samir Allaoui, Philippe Boisse, S. Chatel, Nahiene Hamila, Gilles Hivet, D. Soulat, Emmanuelle Vidal-Salle

2011 - Communication dans un congrès - hal-00597986. -
Titre : Approche mésoscopique pour la mise en forme des renforts tissés de composites
Date de Publication : 15/06/2011
- Pages : 71
Conférence : 17èmes Journées Nationales sur les Composites (JNC17) - 1990
Auteur(s) : Sébastien Gatouillat, Emmanuelle Vidal-Sallé, Philippe Boisse

2011 - Article dans des revues - hal-00578046. -
Titre : Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses
Date de Publication : //2011
Editeur : ElsevierJournal : Composites Science and Technology - Volume : 71 - Pages : 683-692
DOI : 10.1016/j.compscitech.2011.01.011
Auteur(s) : Philippe Boisse, Nahiene Hamila, Emmanuelle Vidal-Salle, François Dumont

2010 - Article dans des revues - hal-01813940. -
Titre : Use of numerical simulation of woven reinforcement forming at mesoscale: Influence of transverse compression on the global response
Date de Publication : //2010
Editeur : Springer VerlagJournal : International Journal of Material Forming - Volume : 3 - Pages : 699-702
DOI : 10.1007/s12289-010-0866-1
Auteur(s) : E. Vidal-Sallé, Q.T. Nguyen, A. Charmetant, J. Bréard, E. Maire, P. Boisse

2010 - Article dans des revues - hal-00938542. -
Titre : Hypoelastic, hyperelastic, discrete and semidiscrete approaches for textile composite reinforcement forming
Date de Publication : //2010
Editeur : Springer VerlagJournal : International Journal of Material Forming - Volume : 3 - Pages : 1229-1240
Auteur(s) : Philippe Boisse, Yamina Aimene, Abdelwaheb Dogui, Samia Dridi, Sebastien Gatouillat, Nahiene Hamila, Muhammad A. Khan, Tarek Mabrouki, Fabrice Morestin, Emmanuelle Vidal-Salle

2010 - Communication dans un congrès - hal-00850090. -
Titre : Use of numerical simulation of woven reinforcementforming at mesoscale: Influence of transversecompression on the global response
Date de Publication : 07/04/2010
- Pages : 6 pages
Conférence : 13th ESAFORM Conference - 1999
Auteur(s) : Emmanuelle Vidal-Sallé, Quang Thanh Nguyen, Adrien Charmetant, Joël Bréard, Eric Maire, Philippe Boisse

2010 - Communication dans un congrès - hal-00850088. -
Titre : Textile reinforcement forming simulation: continuous, discrete and semi-discrete approaches
Date de Publication : 26/10/2010
- Pages : 437-445
Conférence : TEXCOMP 10 - 1974
Auteur(s) : Nahiene Hamila, Yamina Aimene, Sébastien Gatouillat, Sylvain Bel, Emmanuelle Vidal-Sallé, Philippe Boisse

2010 - Communication dans un congrès - hal-00850082. -
Titre : Simulation and tomography analysis of textile composite reinforcement deformation ate the mesoscopic scale
Date de Publication : 26/10/2010
- Pages : 135-142
Conférence : TEXCOMP 10 - 1974
Auteur(s) : Adrien Charmetant, Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Sallé, Eric Maire, Philippe Boisse

2010 - Communication dans un congrès - hal-00850066. -
Titre : FEM numerical simulation of the warm and hot upsetting sliding test
Date de Publication : 07/04/2010
- Pages : 6 pages
Conférence : 13th ESAFORM Conference - 1999
Auteur(s) : Emmanuelle Vidal-Sallé, Mirentxu Dubar, Jean-Claude Boyer, Laurent Dubar

2010 - Communication dans un congrès - hal-00850064. -
Titre : Experimental validation of the plastic wave approach in hot forging of steels
Date de Publication : 13/06/2010
Conférence : ICTMP 2010 - 1991
Auteur(s) : Laure Vigneron, Emmanuelle Vidal-Sallé, Jean-Claude Boyer, Mirentxu Dubar, Laurent Dubar

2010 - Communication dans un congrès - hal-00850062. -
Titre : Experimental and numerical analysis of the deformation of a woven composite reinforcement. Consequences on the permeability
Date de Publication : 11/07/2010
- Pages : 8 pages
Conférence : FPCM 2010 - 1992
Auteur(s) : Quang Thanh Nguyen, Emmanuelle Vidal-Sallé, Philippe Boisse, Joël Bréard, Bertrand Laine

2010 - Article dans des revues - hal-00850046. -
Titre : Meso-scale modelling of forming textile reinforcements
Date de Publication : //2010
Editeur : Emerald Publishing LimitedJournal : World Journal of Engineering - Volume : 7 - Pages : 34-41
Auteur(s) : Emmanuelle Vidal-Sallé, Pierre Badel, Eric Maire, Philippe Boisse

2010 - Article dans des revues - hal-00850045. -
Titre : From macro to meso-scale modelling of forming textile reinforcements
Date de Publication : //2010
Editeur : Emerald Publishing LimitedJournal : World Journal of Engineering - Volume : 7 - Pages : 42-52
Auteur(s) : Emmanuelle Vidal-Sallé, Pierre Badel, Nahiene Hamila, Eric Maire, Philippe Boisse

2010 - Communication dans un congrès - hal-00635787. -
Titre : Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale
Date de Publication : 25/10/2010
Conférence : 10th international conference on textile Composite (Texcomp) - 1975
Auteur(s) : A. Charmetant, Audrey Wendling, Gilles Hivet, Emmanuelle Vidal-Salle, Éric Maire, Philippe Boisse

2010 - Communication dans un congrès - hal-00635784. -
Titre : Modeling strategies for fabrics unit cell geometry-Application to permeability simulations
Date de Publication : 07/04/2010
Editeur : Springer VerlagJournal : International Journal of Material Forming - Volume : 3 - Pages : 727-730
Conférence : The 13th International ESAFORM Conference on Material Forming - 1999
Auteur(s) : Gilles Hivet, Audrey Wendling, Emmanuelle Vidal-Salle, B. Laine, Philippe Boisse

2010 - Article dans des revues - hal-00581092. -
Titre : Textile composite forming simulations at meso and macro scale
Date de Publication : //2010
Editeur : Emerald Publishing LimitedJournal : World Journal of Engineering - Volume : 7 - Pages : 123-129
Auteur(s) : Nahiene Hamila, Naim Akhtar Akhtar Khan, Sébastien Gatouillat, Emmanuel de Luycker, Emmanuelle Vidal-Salle, Tarek Mabrouki

2010 - Communication dans un congrès - hal-00515868. -
Titre : Continuous and discrete approaches for textile composite reinforcement forming simulations
Date de Publication : 17/05/2010
Conférence : ECCM2010, European Conference on Computational Mechanics - 1988
Auteur(s) : Emmanuelle Vidal-Salle, Sébastien Gatouillat, Nahiene Hamila, S. Bel, A. Charmetant, Philippe Boisse

2010 - Communication dans un congrès - hal-00505778. -
Titre : Advantages of the Meso/Macro Approach for the Simulation of Fibre Composite Reinforcements
Date de Publication : 07/04/2010
- Volume : 3 - Pages : pp. 643-646
Conférence : The 13th International ESAFORM Conference on Material Forming - ESAFORM 2010 - 1999
Auteur(s) : Sébastien Gatouillat, Emmanuelle Vidal-Salle, Philippe Boisse

2010 - Article dans des revues - hal-00505131. -
Titre : Numerical and experimental analyses of woven composite reinforcement forming using a hypoelastic behaviour. Application to the double dome benchmark
Date de Publication : //2010
Editeur : ElsevierJournal : Journal of Materials Processing Technology - Volume : 210 - Pages : pp. 378-388
DOI : 10.1016/j.jmatprotec.2009.09.027
Auteur(s) : M.A. Khan, Tarek Mabrouki, Emmanuelle Vidal-Salle, Philippe Boisse

2010 - Article dans des revues - hal-00502248. -
Titre : Hypoelastic, hyperelastic, discrete and semi-discrete approaches for textile composite reinforcement forming
Date de Publication : //2010
Editeur : Springer VerlagJournal : International Journal of Material Forming - Volume : 3 - Pages : 1229-1240
DOI : 10.1007/s12289-009-0664-9
Auteur(s) : Philippe Boisse, Yamina Aimene, A. Dogui, Samia Dridi, Sébastien Gatouillat, Nahiene Hamila, M. A. Khan, Tarek Mabrouki, Fabrice Morestin, Emmanuelle Vidal-Salle

2010 - Chapitre d'ouvrage - hal-00464215. -
Titre : Modelling the structures and properties of woven fabrics
Date de Publication : //2010
- Pages : pp.144-179
Auteur(s) : Emmanuelle Vidal-Salle, Philippe Boisse

2010 - Article dans des revues - hal-00464200. -
Titre : A hyperelastic approach for composite reinforcement large deformation analysis
Date de Publication : //2010
Editeur : SAGE PublicationsJournal : Journal of Composite Materials - Volume : 44 - Pages : pp.5-22
DOI : 10.1177/0021998309345348
Auteur(s) : Yamina Aimene, Emmanuelle Vidal-Salle, B. Hagege, F. Sidoroff, Philippe Boisse

2009 - Communication dans un congrès - hal-01538248. -
Titre : Simulation et analyse par tomographie X de la déformation à l'échelle mésoscopique de renforts textiles de composites en cours de mise en forme= Simulation and tomography analyses of textile composite reinforcement deformation during forming
Date de Publication : //2009
- Pages : 8--p
Conférence : JNC 16 - 2009
Auteur(s) : Emmanuelle Vidal-Salle, Pierre Badel, Éric Maire, Sébastien Gatouillat, Philippe Boisse

2009 - Communication dans un congrès - hal-01413201. -
Titre : Simulations éléments finis de la déformation des renforts fibreux de composites aux échelles macro et mésoscopique
Date de Publication : 25/05/2009
Conférence : 9e Colloque national en calcul des structures - 1979
Auteur(s) : Nahiène Hamila, Pierre Badel, Emmanuelle Vidal-Salle, Philippe Boisse

2009 - Article dans des revues - hal-00935564. -
Titre : Finite-element simulations of textile deformations at macro and mesoscale
Date de Publication : 01/01/2009
Editeur : EDP SciencesJournal : Mechanics & Industry - Volume : 10 - Pages : 15-19
Auteur(s) : Philippe Boisse, Nahiene Hamila, Pierre Badel, Emmanuelle Vidal-Sallé

2009 - Communication dans un congrès - hal-00850080. -
Titre : Simulation and tomography analysis of textile composite reinforcement deformation at the mesoscopic scale
Date de Publication : 27/04/2009
- Pages : 6 pages
Conférence : 12nd ESAFORM Conference - 1978
Auteur(s) : Pierre Badel, Emmanuelle Vidal-Sallé, Eric Maire, Philippe Boisse

2009 - Article dans des revues - hal-00515899. -
Titre : Simulations éléments-finis de la déformation de textiles aux échelles macro et mésoscopique
Date de Publication : //2009
Editeur : EDP SciencesJournal : Mechanics & Industry - Volume : 10 - Pages : 15-19
Auteur(s) : Philippe Boisse, Nahiene Hamila, Pierre Badel, Emmanuelle Vidal-Salle

2009 - Communication dans un congrès - hal-00515874. -
Titre : Meso-macro simulations of continuous fibers composite forming
Date de Publication : 11/03/2009
Conférence : RTS 2009, rotomoulding, thermoforming and stretch-blow moulding - 1995
Auteur(s) : Philippe Boisse, Nahiene Hamila, Pierre Badel, Emmanuelle Vidal-Salle

2009 - Communication dans un congrès - hal-00515865. -
Titre : Composite reinforcement forming simulation at different scales
Date de Publication : 27/01/2009
Conférence : 2nd International Conference on Carbon Composites - 1981
Auteur(s) : Philippe Boisse, Emmanuelle Vidal-Salle, Pierre Badel, Nahiene Hamila, E. Maire

2009 - Article dans des revues - hal-00464254. -
Titre : Rate constitutive equations for computational analyses of textile composite
Date de Publication : //2009
Editeur : ElsevierJournal : Composites Part A: Applied Science and Manufacturing - Volume : 40 - Pages : pp.997-1007
DOI : 10.1016/j.compositesa.2008.04.015
Auteur(s) : Pierre Badel, S. Gauthier, Emmanuelle Vidal-Salle, Philippe Boisse

2009 - Communication dans un congrès - hal-00464211. -
Titre : Simulations éléments finis de la déformation des renforts fibreux de composites aux échelles macro et mésoscopique
Date de Publication : 25/05/2009
- Volume : CDRom - Pages : pp.33-338
Conférence : 9ème colloque national en Calcul des Structures - 1979
Auteur(s) : Nahiene Hamila, Pierre Badel, Emmanuelle Vidal-Salle, Philippe Boisse

2009 - Communication dans un congrès - hal-00464207. -
Titre : About the validity of the plastic wave model for an actual roughness of axisymmetric tooling in bulk forming
Date de Publication : 27/04/2009
- Volume : CDRom - Pages : pp.1-4
Conférence : 12th Esaform - 1978
Auteur(s) : Emmanuelle Vidal-Salle, S. Maisonnette, Jean-Claude Boyer

2009 - Communication dans un congrès - hal-00464204. -
Titre : Composite reinforcement forming simulation: a multiscale approach
Date de Publication : 27/07/2009
- Volume : CDRom - Pages : pp.1-10
Conférence : ICCM17 - 1975
Auteur(s) : Nahiene Hamila, Muhammad Aurangzeb Khan, Sébastien Gatouillat, Emmanuel de Luycker, Emmanuelle Vidal-Salle, Tarek Mabrouki, Philippe Boisse

2009 - Communication dans un congrès - hal-00464202. -
Titre : Simulation and tomography analyses of textile composite reinforcement
Date de Publication : 27/07/2009
- Volume : CDRom - Pages : pp.1-10
Conférence : ICCM17 - 1975
Auteur(s) : Pierre Badel, Philippe Boisse, Emmanuelle Vidal-Salle, L. Bigorgne, E. Maire

2009 - Communication dans un congrès - hal-00451222. -
Titre : Différentes approches pour la simulation de la mise en forme des renforts fibreux de composites. Les intérêts de l'approche mésoscopique
Date de Publication : 24/08/2009
- Pages : Volume CD
Conférence : 19e Congrès Français de Mécanique - 1977
Auteur(s) : Sébastien Gatouillat, Emmanuelle Vidal-Salle, Philippe Boisse

2009 - Communication dans un congrès - hal-00391074. -
Titre : Simulation et analyse par tomographie X de la déformation à l'échelle mésoscopique de renforts textiles de composites en cours de mise en forme = Simulation and tomography analyses of textile composite reinforcement deformation during forming
Date de Publication : 10/06/2009
- Pages : 8 p.
Conférence : JNC 16 - 1993
Auteur(s) : Emmanuelle Vidal-Salle, Pierre Badel, Eric Maire, Sébastien Gatouillat, Philippe Boisse

2008 - Article dans des revues - hal-00938326. -
Titre : Influence of inertia effects on an energy driven thermo-mechanical forming process: contribution to the vif benchmark
Date de Publication : //2008
Editeur : WileyJournal : Steel Research International - Volume : 2 - Pages : 797-803
Auteur(s) : Emmanuelle Vidal-Salle, Jean-Claude Boyer, Smain Bouttaba

2008 - Communication dans un congrès - hal-00506216. -
Titre : Quasi-static versus dynamic explicit scheme for the modeling of an energy-driven thermo-mechanical forming process
Date de Publication : 23/04/2008
Conférence : ESAFORM 2008 in International Journal of Material Forming - 1981
Auteur(s) : Emmanuelle Vidal-Salle, S. Boutabba, Jean-Claude Boyer

2008 - Communication dans un congrès - hal-00506215. -
Titre : Preforming simulation of the reinforcements of woven composites: continuous approach within a commercial code
Date de Publication : 23/04/2008
Conférence : ESAFORM 2008 in International Journal of Material Forming - 1981
Auteur(s) : Muhammad Aurangzeb Khan, Tarek Mabrouki, S. Gauthier, Emmanuelle Vidal-Salle, Philippe Boisse

2008 - Communication dans un congrès - hal-00506214. -
Titre : Hyperelastic approach for composite reinforcement forming simulations
Date de Publication : 23/04/2008
Conférence : ESAFORM 2008 in International Journal of Material Forming - 1981
Auteur(s) : Yamina Aimene, B. Hagege, François Sidoroff, Emmanuelle Vidal-Salle, Philippe Boisse, Samia Dridi

2008 - Communication dans un congrès - hal-00506213. -
Titre : An improved "plastic wave" friction model for rough contact in axisymmetric modeling of bulk forming processes
Date de Publication : 23/04/2008
Conférence : ESAFORM 2008 in International Journal of Material Forming - 1981
Auteur(s) : Emmanuelle Vidal-Salle, S. Boutabba, Y. Cui, Jean-Claude Boyer

2008 - Communication dans un congrès - hal-00506197. -
Titre : Meso-Macro Approach for Textile Composite Forming Simulation
Date de Publication : 13/10/2008
Conférence : Texcomp 9 - 1985
Auteur(s) : Philippe Boisse, Nahiene Hamila, Pierre Badel, Emmanuelle Vidal-Salle

2008 - Communication dans un congrès - hal-00506196. -
Titre : Simulations éléments finis de la déformation de textiles aux échelles macro et mesoscopiques
Date de Publication : 27/08/2008
Conférence : Journée de l'AUM - 1973
Auteur(s) : Philippe Boisse, Nahiene Hamila, Pierre Badel, Emmanuelle Vidal-Salle

2008 - Communication dans un congrès - hal-00506193. -
Titre : Computational Analyses of Mesocopic Composite Reinforcement Deformation During Preforming
Date de Publication : 08/07/2008
Conférence : FPCM9 - 1993
Auteur(s) : Pierre Badel, Eric Maire, Emmanuelle Vidal-Salle, Philippe Boisse

2008 - Communication dans un congrès - hal-00506190. -
Titre : Influence of inertia effects on an energy driven thermo-mechanical forming process: Contribution to the VIF benchmark
Date de Publication : 21/09/2008
Conférence : Metal Forming 2008 - 1978
Auteur(s) : Emmanuelle Vidal-Salle, Jean-Claude Boyer, Smain Bouttaba

2008 - Communication dans un congrès - hal-00506151. -
Titre : Computational determination of the mechanical behavior of textile composite reinforcement. Validation with x-ray tomography
Date de Publication : 23/04/2008
Conférence : ESAFORM 2008 in International Journal of Material Forming - 1981
Auteur(s) : Pierre Badel, Eric Maire, Emmanuelle Vidal-Salle, Philippe Boisse

2008 - Communication dans un congrès - hal-00506146. -
Titre : Computational analyses of fibre composite reinforcement Deformation using continuous and semi-discret approaches
Date de Publication : 10/03/2008
Conférence : 11th EUROMECH-MECAMAT conference - 1995
Auteur(s) : Yamina Aimene, Pierre Badel, Nahiene Hamila, S. Gauthier, Emmanuelle Vidal-Salle, Philippe Boisse

2008 - Article dans des revues - hal-00381447. -
Titre : Simulation and tomography analyzis of textile composite reinforcement deformation at the mesoscopic scale
Date de Publication : //2008
Editeur : ElsevierJournal : Composites Science and Technology - Volume : 68 - Pages : 2433-2440
Auteur(s) : Pierre Badel, Emmanuelle Vidal-Salle, Eric Maire, Philippe Boisse

2008 - Article dans des revues - hal-00381428. -
Titre : Large deformation analysis of fibrous materials using rate constitutive equations
Date de Publication : //2008
Editeur : ElsevierJournal : Computers & Structures - Volume : 86 - Pages : 1164-1175
Auteur(s) : Pierre Badel, Emmanuelle Vidal-Salle, Philippe Boisse

2007 - Article dans des revues - inserm-00557229. -
Titre : Intrinsic mechanical properties of trabecular calcaneus determined by finite-element models using 3D synchrotron microtomography.
Date de Publication : //2007
Editeur : ElsevierJournal : Journal of Biomechanics - Volume : 40 - Pages : 2174-83
DOI : 10.1016/j.jbiomech.2006.10.032
Auteur(s) : Hélène Follet, Françoise Peyrin, Emmanuelle Vidal-Salle, Alain Bonnassie, Christian Rumelhart, Pierre J. Meunier

2007 - Communication dans un congrès - hal-01504293. -
Titre : Simulation de grandes déformations de renforts de composites à l'aide de lois de comportement hypoélastiques
Date de Publication : 21/05/2007
Conférence : 8e Colloque national en calcul des structures - 1981
Auteur(s) : Pierre Badel, Emmanuelle Vidal-Salle, Philippe Boisse

2007 - Communication dans un congrès - hal-00506723. -
Titre : Computational analysis of the mechanical behavior of textile composite reinforcements
Date de Publication : 18/04/2007
Conférence : 10th ESAFORM conference on material forming - 1985
Auteur(s) : Pierre Badel, Emmanuelle Vidal-Salle, Philippe Boisse

2007 - Communication dans un congrès - hal-00506676. -
Titre : Détermination du comportement mécanique des renforts tissés de composites par des analyses éléments finis mésoscopiques
Date de Publication : 06/06/2007
Conférence : 15emes Journées Nationales sur les Composites - 1995
Auteur(s) : Pierre Badel, Emmanuelle Vidal-Salle, Philippe Boisse, S. Chatel

2007 - Communication dans un congrès - hal-00506636. -
Titre : Study of the transverse structure of wood at different scales and consequences on the fracture modes
Date de Publication : 21/05/2007
Conférence : 3rd International Symposium on Wood Machining Properties of Wood and Wood Composites - 1981
Auteur(s) : P. Simon, Dominique Eyheramendy, Jean-François Jullien, Emmanuelle Vidal-Salle, Fabrice Morestin

2007 - Communication dans un congrès - hal-00506625. -
Titre : Vers une meilleure analyse du comportement mécanique du bois grâce aux mesures de champ et aux outils de simulation numériques
Date de Publication : 11/01/2007
Conférence : journée scientifique du GIS Bois Construction Environnement - 1995
Auteur(s) : P. Simon, Hubert Maigre, Dominique Eyheramendy, Jean-François Jullien, Emmanuelle Vidal-Salle

2007 - Communication dans un congrès - hal-00506150. -
Titre : Mesoscopic mechanical analyses of textile composites. Validation with x-ray tomography
Date de Publication : 10/03/2007
Conférence : 11th EUROMECH-MECAMAT conference - 1994
Auteur(s) : Pierre Badel, Eric Maire, Emmanuelle Vidal-Salle, Philippe Boisse

2007 - Article dans des revues - hal-00380803. -
Titre : Intrinsic mechanical properties of trabecular calcaneus determined by finite element models using 3D synchrotron microtomography
Date de Publication : //2007
Editeur : ElsevierJournal : Journal of Biomechanics - Volume : 40 - Pages : 2174-2183
Auteur(s) : Hélène Follet, Françoise Perrin, Emmanuelle Vidal-Salle, A. Bonnassie, Claude Rumelhart

2007 - Article dans des revues - hal-00380799. -
Titre : Computational determination of in plane shear mechanical behaviour of textile composite reinforcements
Date de Publication : //2007
Editeur : ElsevierJournal : Computational Materials Science - Volume : 40 - Pages : 439-448
Auteur(s) : Pierre Badel, Emmanuelle Vidal-Salle, Philippe Boisse

2007 - Article dans des revues - hal-00378161. -
Titre : Constitutive equations for orthotropic nonlinear viscoelastic behaviour using a generalized Maxwell model : Application to wood material
Date de Publication : //2007
Editeur : Society for Experimental MechanicsJournal : Mechanics of Time-Dependent Materials - Volume : 11 - Pages : 127-142
Auteur(s) : Emmanuelle Vidal-Salle, Pierre Chassagne

2006 - Communication dans un congrès - hal-00506883. -
Titre : Mechanical consequences induced by heat and mass transfers during wood drying process
Date de Publication : 26/04/2006
Conférence : 3rd International Conference on Thermal Process Modelling and Simulation, - 1976
Auteur(s) : Pierre Chassagne, Emmanuelle Vidal-Salle, Dominique Eyheramendy, Jean-François Jullien

2005 - Communication dans un congrès - hal-04226975. -
Titre : Modélisation de phénomènes couplés thermo-hydro-mécaniques. Application au séchage du bois
Date de Publication : 29/08/2005
Conférence : 17e Congrès Français de Mécanique - 1968
Auteur(s) : Pierre Chassagne, Emmanuelle Vidal-Salle, Jean-François Jullien

2005 - Communication dans un congrès - hal-01812980. -
Titre : Etude de phénomènes multi-physiques couplés Application au bois sous les sollicitations thermo-hydro-mécaniques variables induites par l'opération de séchage
Date de Publication : 17/05/2005
Conférence : 7e colloque national en calcul des structures - 1983
Auteur(s) : Pierre Chassagne, Emmanuelle Vidal-Sallé, Jean-François Jullien

2005 - Communication dans un congrès - hal-00507230. -
Titre : Modélisation de phénomènes couplés thermo-hydro-mécaniques Application au séchage du bois
Date de Publication : 29/08/2005
Conférence : 17ème Congrès Français de Mécanique - 1968
Auteur(s) : Pierre Chassagne, Emmanuelle Vidal-Salle, Jean-François Jullien

2005 - Communication dans un congrès - hal-00507206. -
Titre : Etude de phénomènes multi-physiques couplés. Application au bois sous les solliciations thermo-hydro-mécaniques variables induites par l'opération de séchage.
Date de Publication : 17/05/2005
Conférence : 7° Colloque National en Calcul des Structures - 1983
Auteur(s) : Pierre Chassagne, Emmanuelle Vidal-Salle, Jean-François Jullien

2005 - Communication dans un congrès - hal-00507185. -
Titre : Constitutive model for amorphous polymers based on the quasi point defect theory
Date de Publication : 27/04/2005
Conférence : ESAFORM 2005 - 1974
Auteur(s) : R.G. Rinaldi, Roger Gaertner, Michel Brunet, Emmanuelle Vidal-Salle, Laurent Chazeau

2005 - Article dans des revues - hal-00373876. -
Titre : Identification procedure of a hardening law for powder compaction
Date de Publication : //2005
Editeur : ElsevierJournal : Powder Technology - Volume : 157 - Pages : 183-190
Auteur(s) : D. Falgon, Emmanuelle Vidal-Salle, Jean-Claude Boyer, R. Peczalski, J. Andrieu

2005 - Article dans des revues - hal-00373843. -
Titre : Impact of density gradients on the stress level within a green ceramic compact during drying.
Date de Publication : //2005
Editeur : Taylor & FrancisJournal : Drying Technology - Volume : 23 - Pages : 71-82
Auteur(s) : R. Peczalski, D. Falgon, J. Andrieu, Jean-Claude Boyer, Emmanuelle Vidal-Salle

2004 - Communication dans un congrès - hal-00507401. -
Titre : Prédiction des distorsions du bois lors du séchage Modélisation thermo-hydro-mécanique
Date de Publication : 02/11/2004
Conférence : Journées Scientifiques de la Forêt et du Bois - 1991
Auteur(s) : Pierre Chassagne, Emmanuelle Vidal-Salle, Jean-François Jullien

2004 - Communication dans un congrès - hal-00507394. -
Titre : Identification procedure of a hardening law for powder compaction
Date de Publication : 04/05/2004
Conférence : 4ème Colloque Science et Technologie des Poudres - 1995
Auteur(s) : D. Falgon, Emmanuelle Vidal-Salle, Jean-Claude Boyer, R. Peczalski, J. Andrieu

2004 - Communication dans un congrès - hal-00507391. -
Titre : Thick and thin film lubrication models for bulk forming simulations
Date de Publication : 13/06/2004
Conférence : NUMIFORM 2004 - 1985
Auteur(s) : Fabrice Helenon, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2004 - Communication dans un congrès - hal-00507366. -
Titre : The effects of a highly sensitive temperature viscosity on the tool workpiece interface behaviour under thick film lubrication conditions
Date de Publication : 28/04/2004
Conférence : The 7th Esaform Conference on Material Forming ESAFORM 2004 - 1972
Auteur(s) : Fabrice Helenon, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2004 - Article dans des revues - hal-00450566. -
Titre : Lubricant flow between rough surfaces during closed-die forming
Date de Publication : //2004
Editeur : ElsevierJournal : Journal of Materials Processing Technology - Volume : 153-154 - Pages : 707-713
Auteur(s) : Fabrice Helenon, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2003 - Communication dans un congrès - hal-01538074. -
Titre : Constitutive modelling of orthotropic damage at finite strains: numerical modelling and experiments
Date de Publication : //2003
Conférence : Computational Plasticity VII-Fundamentals and Application - 2003
Auteur(s) : Cyril Bordreuil, Eric Maire, Laurent Babout, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2003 - Communication dans un congrès - hal-00507880. -
Titre : Comparison of two orthotropic ductile damage models
Date de Publication : 28/04/2003
Conférence : 6th Int. ESAFORM Conference on Material Forming - 1971
Auteur(s) : Cyril Bordreuil, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2003 - Communication dans un congrès - hal-00507856. -
Titre : Constitutive modelling of orthotropic damage at finite strains : numerical modelling and experiments
Date de Publication : 07/04/2003
Conférence : Computational Plasticity VII - Fundamentals and Application - 1992
Auteur(s) : Cyril Bordreuil, Eric Maire, Laurent Babout, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2003 - Communication dans un congrès - hal-00507849. -
Titre : Lubricant flow between rough surfaces during closed-die forming
Date de Publication : 08/07/2003
- Pages : 1132-1135
Conférence : International Conference on Advances in Materials & Processing Technologies "AMPT 2003" - 1988
Auteur(s) : Fabrice Helenon, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2003 - Communication dans un congrès - hal-00507462. -
Titre : Modelling of the friction thermo-mechanical coupling at the workpiece-tool interface during bulk forming processes.
Date de Publication : 02/09/2003
Conférence : 30th Leeds-Lyon Symposium on Tribology : Transient processes in tribology - 1992
Auteur(s) : Emmanuelle Vidal-Salle, A.S. Marchand

2003 - Communication dans un congrès - hal-00507331. -
Titre : A friction model for mixed lubrication regime coupled to a prediction of a local thermal contact resistance for axisymmetric configurations
Date de Publication : 02/09/2003
Conférence : 30th Leeds-Lyon Symposium on Tribology : Transient processes in tribology - 1992
Auteur(s) : Laurent Baillet, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2003 - Article dans des revues - hal-00505413. -
Titre : Modelling of the friction thermo-mechanical coupling at the workpiece-tool interface during bulk forming processes
Date de Publication : //2003
Journal : TRIBOLOGY AND INTERFACE ENGINEERING SERIES - Volume : 43 - Pages : pp. 349-356
DOI : 10.1016/S0167-8922(03)80062-7
Auteur(s) : Emmanuelle Vidal-Salle, A.S. Marchand

2003 - Article dans des revues - hal-00505404. -
Titre : A friction model for mixed lubrication regime coupled to a prediction of a local thermal contact resistance for axisymmetric configurations
Date de Publication : //2003
Journal : TRIBOLOGY AND INTERFACE ENGINEERING SERIES - Volume : 43 - Pages : pp. 339-348
DOI : 10.1016/S0167-8922(03)80061-5
Auteur(s) : Laurent Baillet, Emmanuelle Vidal-Salle, J.C. Boyer

2003 - Article dans des revues - hal-00505390. -
Titre : An orthotropic specific damage model with inclusion consideration
Date de Publication : //2003
Editeur : ElsevierJournal : Journal of Materials Processing Technology - Volume : 143 - Pages : pp. 337-341
DOI : 10.1016/S0924-0136(03)00448-5
Auteur(s) : C. Bordreuil, Emmanuelle Vidal-Salle, J.C. Boyer

2003 - Article dans des revues - hal-00454699. -
Titre : On modelling the growth and the orientation changes of ellipsoidal voids in a rigid plastic matrix
Date de Publication : //2003
Editeur : IOP PublishingJournal : Modelling and Simulation in Materials Science and Engineering - Volume : 11 - Pages : 365-380
Auteur(s) : Cyril Bordreuil, Jean-Claude Boyer, Emmanuelle Vidal-Salle

2002 - Communication dans un congrès - hal-00508024. -
Titre : Comparison of different friction laws in numerical modelling of bulk metal forming
Date de Publication : 18/06/2002
Conférence : EUROMECH 435 - FWMF Friction and Wear in Metal Forming - 1978
Auteur(s) : Emmanuelle Vidal-Salle, Laurent Baillet, Jean-Claude Boyer

2002 - Communication dans un congrès - hal-00507958. -
Titre : Thermal and mechanical constitutive laws for a semi-transparent viscous lubricant
Date de Publication : 14/04/2002
- Pages : 415-418
Conférence : 5th Esaform Conference on Material Forming - 1984
Auteur(s) : Emmanuelle Vidal-Salle, Jean-Claude Boyer

2002 - Chapitre d'ouvrage - hal-00455085. -
Titre : A ductile damage model with inclusion considerations - Three-dimensional prediction of cavity growth in finite transformations
Date de Publication : //2002
- Pages : 215-224
Auteur(s) : Cyril Bordreuil, Jean-Claude Boyer, Emmanuelle Vidal-Salle

2002 - Article dans des revues - hal-00454947. -
Titre : A shear stress dependent ductile damage model
Date de Publication : //2002
Editeur : ElsevierJournal : Journal of Materials Processing Technology - Volume : 121 - Pages : 87-93
Auteur(s) : Jean-Claude Boyer, Emmanuelle Vidal-Salle, Carole Staub

2001 - Communication dans un congrès - hal-00508074. -
Titre : An orthotropic specific damage model with inclusion consideration.
Date de Publication : 18/09/2001
Conférence : AMPT'01 New developments on modelling and manufacturing process control - 1974
Auteur(s) : Cyril Bordreuil, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2001 - Communication dans un congrès - hal-00508073. -
Titre : Comparison of ductile damage models
Date de Publication : 23/04/2001
Conférence : 4th ESAFORM Conference on Material Forming - 1974
Auteur(s) : Cyril Bordreuil, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2001 - Chapitre d'ouvrage - hal-00455954. -
Titre : Comparison of ductile damage models
Date de Publication : //2001
- Pages : 303-318
Auteur(s) : Cyril Bordreuil, Emmanuelle Vidal-Salle, Jean-Claude Boyer

2001 - Article dans des revues - hal-00455860. -
Titre : Friction law for hydrostatic mixed lubrication regime
Date de Publication : //2001
Editeur : ElsevierJournal : Journal of Materials Processing Technology - Volume : 118 - Pages : 102-109
Auteur(s) : Emmanuelle Vidal-Salle, Laurent Baillet, Jean-Claude Boyer

2000 - Communication dans un congrès - hal-00508141. -
Titre : Residual stress prediction for the drying and cooling of pasta noodles.
Date de Publication : 13/04/2000
Conférence : 3rd ESAFORM Conference on Material Forming - 1983
Auteur(s) : Jean-Claude Boyer, Emmanuelle Vidal-Salle

2000 - Communication dans un congrès - hal-00508138. -
Titre : Consideration of the void shape on a damage model sensitive to shear effects
Date de Publication : 20/08/2000
Conférence : COM'2000 Mathematical Modeling in Metals Processing and Manufacturing - 1972
Auteur(s) : Cyril Bordreuil, Jean-Claude Boyer, Emmanuelle Vidal-Salle